我要投稿
  • 您当前的位置:57365.com -> 技术教程 -> 服务器网络 -> 服务器教程 -> FTP服务器教程 -> 教程内容
  • [ 收藏本页教程 ]
  • vsftp快速设置FTP服务器教程

    教程作者:佚名    教程来源:不详   教程栏目:FTP服务器教程    收藏本页
                  摘要:vsftp快速设置

    改动两个地方即可

    [root@test11 vsftpd]# more vsftpd.conf
    # Example config file /etc/vsftpd.conf
    #
    # The default compiled in settings are fairly paranoid. This sample file
    # loosens things up a bit, to make the ftp daemon more usable.
    # Please see vsftpd.conf.5 for all compiled in defaults.
    #
    # READ THIS: This example file is NOT an exhaustive list of vsftpd options.
    # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
    # capabilities.
    #
    # Allow anonymous FTP? (Beware - allowed by default if you comment this out).
    anonymous_enable=YES
    #
    # Uncomment this to allow local users to log in.
    local_enable=YES
    #
    # Uncomment this to enable any form of FTP write command.
    write_enable=YES
    #
    # Default umask for local users is 077. You may wish to change this to 022,
    # if your users expect that (022 is used by most other ftpd's)
    local_umask=022
    #anon_root=/backup
    anon_root=/var/ftp/pub
    #
    # Uncomment this to allow the anonymous FTP user to upload files. This only
    # has an effect if the above global write enable is activated. Also, you will
    # obviously need to create a directory writable by the FTP user.
    #anon_upload_enable=YES
    #
    # Uncomment this if you want the anonymous FTP user to be able to create
    # new directories.
    #anon_mkdir_write_enable=YES
    #
    # Activate directory messages - messages given to remote users when they
    # go into a certain directory.
    dirmessage_enable=YES
    #
    # Activate logging of uploads/downloads.
    xferlog_enable=YES
    #
    # Make sure PORT transfer connections originate from port 20 (ftp-data).
    connect_from_port_20=YES
    #
    # If you want, you can arrange for uploaded anonymous files to be owned by
    # a different user. Note! Using "root" for uploaded files is not
    # recommended!
    #chown_uploads=YES
    #chown_username=whoever
    #
    # You may override where the log file goes if you like. The default is shown
    # below.
    #xferlog_file=/var/log/vsftpd.log
    #
    # If you want, you can have your log file in standard ftpd xferlog format
    xferlog_std_format=YES
    #
    # You may change the default value for timing out an idle session.
    #idle_session_timeout=600
    #
    # You may change the default value for timing out a data connection.
    #data_connection_timeout=120
    #
    # It is recommended that you define on your system a unique user which the
    # ftp server can use as a totally isolated and unprivileged user.
    #nopriv_user=ftpsecure
    #
    # Enable this and the server will recognise asynchronous ABOR requests. Not
    # recommended for security (the code is non-trivial). Not enabling it,
    # however, may confuse older FTP clients.
    #async_abor_enable=YES
    #
    # By default the server will pretend to allow ASCII mode but in fact ignore
    # the request. Turn on the below options to have the server actually do ASCII
    # mangling on files when in ASCII mode.
    # Beware that turning on ascii_download_enable enables malicious remote parties
    # to consume your I/O resources, by issuing the command "SIZE /big/file" in
    # ASCII mode.
    # These ASCII options are split into upload and download because you may wish
    # to enable ASCII uploads (to prevent uploaded scripts etc. from breaking),
    # without the DoS risk of SIZE and ASCII downloads. ASCII mangling should be
    # on the client anyway..
    #ascii_upload_enable=YES
    #ascii_download_enable=YES
    #
    # You may fully customise the login banner string:
    #ftpd_banner=Welcome to blah FTP service.
    #
    # You may specify a file of disallowed anonymous e-mail addresses. Apparently
    # useful for combatting certain DoS attacks.
    #deny_email_enable=YES
    # (default follows)
    #banned_email_file=/etc/vsftpd.banned_emails
    #
    # You may specify an explicit list of local users to chroot() to their home
    # directory. If chroot_local_user is YES, then this list becomes a list of
    # users to NOT chroot().
    chroot_local_user=YES
    #chroot_list_enable=YES
    # (default follows)
    #chroot_list_file=/etc/vsftpd.chroot_list
    #
    # You may activate the "-R" option to the builtin ls. This is disabled by
    # default to avoid remote users being able to cause excessive I/O on large
    # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
    # the presence of the "-R" option, so there is a strong case for enabling it.
    #ls_recurse_enable=YES
    max_clients=500
    max_per_ip=50
    local_max_rate=100000
    anon_max_rate=30000
    pasv_min_port=50000
    pasv_max_port=60000
    idle_session_timeout=600
    data_connection_timeout=120
    accept_timeout=60
    connect_timeout=60

    pam_service_name=vsftpd
    userlist_enable=YES
    #enable for standalone mode
    listen=YES
    tcp_wrappers=YES

    我要投稿   -   广告合作   -   关于本站   -   友情连接   -   网站地图   -   联系我们   -   版权声明   -   设为首页   -   加入收藏   -   网站留言
    Copyright © 2009 - 20012 www.www.hxswjs.com All Rights Reserved.57365.com 版权所有